ECS4150-28P

L2+/L3 Lite Gigabit Ethernet PoE Switch

  • 24 x 1G RJ-45 Ports (PoE)
  • af/at 370W
  • 4 x 10G SFP+ Uplink Ports
  • 1 x Console Port
  • 1 x USB Port
  • 128 Gbps Switching Capacity
  • Support ecCLOUD
SUPPORT OPENLAN SWITCHING
Overview

​​The ECS4150-28P is a PoE switch which can provide up to 30 Watts to Power Devices such as Wireless Access Point, VoIP Phone, Surveillance camera, IoT devices etc over Cat 5 UTP cable eliminate the need for individual power source.

Specification
  • Interface
    • 24 x RJ-45 10/100/1000 Ports
    • 24 x PoE+ Ports
    • 4 x 10G SFP+ Uplink Ports
    • 1 x Console Port
    • 1 x USB Port
  • Performance
    • Switching Capacity: 128 Gbps
    • Forwarding Rate: 95 Mbps
    • NAND Flash Memory: 256 MB
    • DRAM: 1 GB
    • MAC Address Table: 16 K
    • Jumbo Frames: 10 KB
    • Auto-negotiation, Auto-MDI/MDIX
  • Power Supply
    • Max System Power Consumption: 450W
    • Power input:
      – 100 to 240 VAC, 50/60 Hz
  • PoE
    • PoE Power Budget: 370W (af/at)
    • Auto disable aſter exceeding power budget
    • Dynamic power allocation
  • Mechanical
    • Rack Space: 19″
    • Dimension (WxDxH): 44 cm x 28 cm x 4.4 cm
    • Weight: 4.75kg
  • Environmental
    • Operating Temperature: -5 to 45°C
    • Storage Temperature: -40 to 70 °C
    • Operating Humidity (non-condensing): 5% to 95%
    • Storage Temperature (non-condensing): 5% to 95%
  • L2 Features
    • 10/100/1000BASE-T copper interfaces
    • Auto-negotiation for port speed and duplex mode
    • Auto MDI/MDI-X
    • Dual-speed (1G and 10G) fiber interfaces
    • SFP+ Ports Support:
      • IEEE 802.3ae changeable (10GBASE-SR/LR)
      • IEEE 802.3z (1000BASE-SX/LX) transceivers, and 10G DAC/AOC

     

    • Digital Diagnostic Monitoring (DDM) on 10G SFP+ port
    • Flow Control:
      • IEEE 802.3x for full duplex mode
      • Back-Pressure for half duplex mode

     

    • Jumbo frames 10KB
    • Broadcast/Multicast/ Unknown Unicast Storm Control
    • Spanning Tree Protocol:
      • IEEE 802.1D Spanning Tree Protocol (STP)
      • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
      • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), 64 instances
      • BPDU Guard
      • BPDU filtering
      • Root Guard
      • BPDU transparent
      • Loopback detection

     

    • Non-Spanning Tree Loopback detection
    • ITU-T G.8032 Ethernet Ring Protection:
      • Sub 50 msec convergence
      • Revertive operation mode
      • Multiple-ring network

     

    • VLANs:
      • Supports 4K VLAN
      • Port-based VLAN
      • IEEE 802.1Q VLAN
      • GVRP
      • IEEE 802.1v Protocol-based VLAN
      • IP Subnet-based VLAN
      • MAC-based VLAN
      • Traffic Segmentation

     

    • L2 Virtual Private VLAN:
      • Q-in-Q
      • L2 Protocol tunneling (xSTP, CDP, VTP and PVST+, LLDP)
      • CDP/PVST+ Filtering
      • Selective Q-in-Q

     

    • Link Aggregation:
      • Static Trunk
      • IEEE 802.3ad Link Aggregation Control Protocol
      • Trunk Groups: 16, up to 8 GE/4 10G ports per group
      • Load Balancing: SA+DA, SA, DA, SIP+DIP, SIP, DIP

     

    • Multi-chassis Link Aggregation
    • Static LACP
    • IGMP Snooping:
      • IGMP Authentication
      • IGMP v1/v2/v3 snooping
      • IGMP Proxy reporting
      • IGMP Filtering
      • IGMP Throttling
      • IGMP Immediate Leave
      • IGMP Querier

     

    • MVR (Multicast VLAN Registration): Supports 5 multicast VLANs
    • Port mirroring
      • VLAN Mirror/Mac-Based Mirror/ACL Mirror

     

    • Remote port mirror (RSPAN)
  • QoS Features
    • Priority Queues: 8 hardware queues per port
    • Traffic classification:
      • IEEE 802.1p CoS
      • IP Precedence
      • DSCP
      • MAC Access control list (Source/Destination MAC, Ether type, Priority ID/ VLAN ID)
      • IP standard access control list (Source IP)
      • IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number)

     

    • Traffic Scheduling:
      • Strict Priority
      • Weighted Round Robin
      • Strict + WRR

     

    • Ingress policy map (police rate, remark CoS)
    • Egress policy map (police rate, remark CoS/DSCP)
    • Rate Limiting (Ingress and Egress, per port base)
      • GE: Resolution 64Kbps ~ 1,000Mbps
      • 10G: Resolution 64Kbps ~ 10,000Mbps

     

    • Auto Traffic Control
  • Security
    • Port security
    • IEEE 802.1X port based and MAC based authentication
    • IEEE 802.1X Supplicant
    • Dynamic VLAN Assignment, Auto QoS
    • MAC authentication
    • Web authentication
    • Voice VLAN
    • Guest VLAN
    • L2/L3/L4 Access Control List:
      • MAC Access control list (Source/Destination MAC, Ether type,
      • Priority ID/ VLAN ID )
      • IP standard access control list (Source IP)
      • IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number)

     

    • IPv6 ACL
    • DHCP Snooping
    • DHCP Info
    • DHCP Option 82
    • DHCP Option 82 Relay
    • IP Source Guard
    • PPPoE IA
    • Dynamic ARP Inspection
    • Denial of Service
    • Login Security
    • RADIUS authentication
    • RADIUS accounting
    • TACACS + authentication
    • TACACS + accounting
    • TACACS + authorization
    • Management Interface Access Filtering (SNMP, Web, Telnet)
    • SSH (v1.5/v2.0) for security Telnet
    • SSL for HTTPS
    • SNMPv3
  • Green Ethernet
    • IEEE 802.3az Energy-Efficient Ethernet (EEE)
  • IPv6
    • IPv4/IPv6 Dual Protocol stack
    • IPv6 Address Types Stack: Unicast
    • IPv6 Neighbor Discovery:
      • Duplicate address
      • Address resolution
      • Unreachable neighbor detection

     

    • Stateless auto-configuration
    • Manual configuration
    • Remote IPv6 ping
    • IPv6 Telnet support
    • HTTP over IPv6
    • SNMP over IPv6
    • IPv6 Syslog support
    • IPv6 TFTP support
    • MLD Snooping v1/v2
    • IPv6 source guard
    • DHCPv6 snooping
    • MVR6
  • Management
    • Zero Touch provisioning
    • mDNS
    • Switch Management:
      • CLI via console port or Telnet
      • Web management
      • SNMP v1, v2c, v3

     

    • Firmware and Configuration:
      • Firmware upgrade via TFTP/HTTP/FTP/SFTP server
      • Multiple configuration files
      • Configuration file upload/download via TFTP/HTTP/FTP/SFTP server

     

    • RMON (groups 1, 2, 3 and 9)
    • DHCP client for IP address assignment
    • DHCP dynamic provision option 66,67
    • SNTP
    • Syslog (local Flash)
    • Remotelog (RFC3164)
    • SMTP (E-mail Notification)
    • Supports LLDP (802.1ab)
    • sFlow v4, v5
    • IPv6 sFlow
  • Routing
    • IPv4/IPv6 Static Route
    • Dying Gasp
  • Safety
    • UL (CSA 22.2. NO 60950-1 and UL60950-1)
    • CB (IEC60950-1)
  • Electromagnetic Compatibility
    • CE Mark
    • FCC Class A
    • CISPR Class A
    • BSMI
  • Supported Transceivers and Cables
    • 1000BASE-SX/LX
    • 10GBASE-SR/LR/RJ45
    • 10GBASE-DAC/AOC Cable

    *Note: More optics and detailed cabling information can be found “Here

Download
Related Products
Talk to our experts today!
Edgecore Wi-Fi.
Choose the network that's right for you.