ECS4125-10P

L2+/L3 Lite 2.5G Ultra PoE++ Switch

  • 8 x 1G/2.5G RJ45 Ports (PoE)
  • af/at/bt 240W
  • 2 x 10G SFP+ Uplink Ports
  • 1 x Console Port
  • 80G Switching Capacity
  • Support ecCLOUD
SUPPORT OPENLAN SWITCHING
Overview

The Edgecore ECS4125-10P switch is a 2.5 Gigabit Ethernet access switch with two 10G uplink ports. The switch is an ideal 2.5 Gigabit PoE access switch for SMB, enterprise, and campus networks. The ECS4125-10P switch is packed with features that bring high availability, comprehensive security, robust multicast control, and advance QoS to the network edge, while maintaining simple management. The switch also supports the most advance IPv6 management, IPv6 security, and IPv6 multicast control in accordance with the growth of IPv6 deployment.

Specification
  • Interface
    • 8 x RJ-45 10/100/1000 Ports
    • 8 x PoE++ Ports
    • 2 x 10G SFP+ Uplink Ports
    • 1 x Console Port
  • Performance
    • Switching Capacity: 80 Gbps
    • Forwarding Rate: 59.52 Mbps
    • Flash Memory: 64 MB
    • DRAM: 1 GB
    • MAC Address Table: 16 K
    • Jumbo Frames: 12 KB
    • Auto-negotiation, Auto-MDI/MDIX
  • Power Supply
    • Max System Power Consumption: 20W (w/o PoE)
    • Power input:
      • 100-240 VAC, 50-60 Hz
  • PoE
    • PoE Power Budget: 240W (at/af/bt)
    • Deliver up to 30W on 8 ports, or 60W on 4 ports
    • Auto disable aſter exceeding power budget
    • Dynamic power allocation
  • Mechanical
    • Rack Space: 19″
    • Dimension (WxDxH): 33 cm x 20.8 cm x 4.4 cm
    • Weight: 2.41kg
  • Environmental
    • Operating Temperature: 0 to 50°C
    • Storage Temperature: -40 to 70 °C
    • Operating Humidity (non-condensing): 10% to 95%
    • Storage Temperature (non-condensing): 10% to 95%
  • L2 Features
    • 5G BASE-T copper interfaces
    • Auto-negotiation for port speed and duplex mode
    • Auto MDI/MDI-X
    • Dual-speed (1G and 10G) fiber interfaces
    • SFP+ Ports Support:
      • IEEE 802.3ae changeable (10GBASE-SR/LR)
      • IEEE 802.3z (1000BASE-SX/LX) transceivers, and 10G DAC/AOC

     

    • Digital Diagnostic Monitoring (DDM) on 10G SFP+ port
    • Flow Control:
      • IEEE 802.3x for full duplex mode
      • Back-Pressure for half duplex mode

     

    • Jumbo frames 12KB
    • Broadcast/Multicast/ Unknown Unicast Storm Control
    • Spanning Tree Protocol:
      • IEEE 802.1D Spanning Tree Protocol (STP)
      • IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
      • IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), 64 instances
      • BPDU Guard
      • BPDU filtering
      • Root Guard
      • BPDU transparent
      • Loopback detection

     

    • Non-Spanning Tree Loopback detection
    • ITU-T G.8032 Ethernet Ring Protection:
      • Sub 50 msec convergence
      • Revertive operation mode
      • Multiple-ring network

     

    • VLANs:
      • Supports 4K VLAN
      • Port-based VLAN
      • EEE 802.1Q VLAN
      • GVRP
      • IEEE 802.1v Protocol-based VLAN
      • IP Subnet-based VLAN
      • MAC-based VLAN
      • Traffic Segmentation

     

    • L2 Virtual Private VLAN:
      • Q-in-Q
      • L2 Protocol tunneling (xSTP, CDP, VTP and PVST+, LLDP)
      • CDP/PVST+ Filtering
      • Selective Q-in-Q

     

    • Link Aggregation:
      • Static Trunk
      • IEEE 802.3ad Link Aggregation Control Protocol
      • Trunk Groups: 16, up to 8 GE/4 10G ports per group
      • Load Balancing: SA+DA, SA, DA, SIP+DIP, SIP, DIP

     

    • IGMP Snooping:
      • IGMP v1/v2/v3 snooping
      • IGMP Proxy reporting
      • IGMP Filtering
      • IGMP Throttling
      • IGMP Immediate Leave
      • IGMP Querier

     

    • MVR (Multicast VLAN Registration): Supports 5 multicast VLANs
    • Port mirroring
    • Remote port mirror (RSPAN)

     

    QoS Features

    • Priority Queues: 8 hardware queues per port
    • Traffic classification:
      • IEEE 802.1p CoS
      • IP Precedence
      • DSCP
      • MAC Access control list (Source/Destination MAC, Ether type, riority ID/VLAN ID)
      • IP standard access control list (Source IP)
      • IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number)

     

    • Traffic Scheduling:
      • Strict Priority
      • Weighted Round Robin
      • Strict + WRR

     

    • Ingress policy map (police rate, remark CoS)
    • Egress policy map (police rate, remark CoS/DSCP)
    • Rate Limiting (Ingress and Egress, per port base)
      • GE: Resolution 64 Kbps ~ 1,000 Mbps
      • 10G: Resolution 64 Kbps ~ 10,000 Mbps

     

    • Auto Traffic Control
  • QoS Features
    • Priority Queues: 8 hardware queues per port
    • Traffic classification:
      • IEEE 802.1p CoS
      • IP Precedence
      • DSCP
      • MAC Access control list (Source/Destination MAC, Ether type, riority ID/VLAN ID)
      • IP standard access control list (Source IP)
      • IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number)

     

    • Traffic Scheduling:
      • Strict Priority
      • Weighted Round Robin
      • Strict + WRR

     

    • Ingress policy map (police rate, remark CoS)
    • Egress policy map (police rate, remark CoS/DSCP)
    • Rate Limiting (Ingress and Egress, per port base)
      • GE: Resolution 64 Kbps ~ 1,000 Mbps
      • 10G: Resolution 64 Kbps ~ 10,000 Mbps

     

    • Auto Traffic Control
  • Security
    • Port security
    • IEEE 802.1X port based and MAC based authentication
    • Dynamic VLAN Assignment, Auto QoS
    • MAC authentication
    • Web authentication
    • Voice VLAN
    • Guest VLAN
    • L2/L3/L4 Access Control List:
      • MAC Access control list (Source/Destination MAC, Ether type, riority ID/VLAN ID )
      • IP standard access control list (Source IP)
      • IP extended access control list (Source/Destination IP, Protocol, TCP/UDP port number)

     

    • IPv6 ACL
    • DHCP Snooping
    • DHCP Option 82
    • DHCP Option 82 Relay
    • IP Source Guard
    • PPPoE IA
    • Dynamic ARP Inspection
    • Denial of Service
    • Login Security
    • RADIUS authentication
    • RADIUS accounting
    • TACACS + authentication
    • TACACS + accounting
    • TACACS + authorization
    • Management Interface Access Filtering (SNMP, Web, Telnet)
    • SSH (v1.5/v2.0) for secure Telnet
    • SSL for HTTPS
    • SNMPv3
  • Green Ethernet
    • EEE 802.3az Energy-Efficient Ethernet (EEE)
  • IPv6
    • IPv4/IPv6 Dual Protocol stack
    • IPv6 Address Types Stack: Unicast
    • IPv6 Neighbor Discovery:
      • Duplicate address
      • Address resolution
      • Unreachable neighbor detection

     

    • Stateless auto-configuration
    • Manual configuration
    • Remote IPv6 ping
    • IPv6 Telnet support
    • HTTP over IPv6
    • SNMP over IPv6
    • IPv6 Syslog support
    • IPv6 TFTP support
    • MLD Snooping v1/v2
    • IPv6 source guard
    • DHCPv6 snooping
    • MVR6
  • Management
    • Switch Management:
      • CLI via console port or Telnet/SSH
      • Web management
      • SNMP v1, v2c, v3

     

    • Firmware and Configuration:
      • Firmware upgrade via TFTP/HTTP/FTP/SFTP server
      • Multiple configuration files
      • Configuration file upload/download via TFTP/HTTP/FTP/SFTP server

     

    • RMON (groups 1, 2, 3 and 9)
    • BOOTP, DHCP client for IP address assignment
    • DHCP dynamic provision option 66,67
    • SNTP
    • Syslog (local flash)
    • Remotelog (RFC3164)
    • SMTP (E-mail Notification)
    • Support LLDP (802.1ab)
    • sFlow v4, v5
  • Routing
    • IPv4 Static Route/RIP
  • Safety
    • UL (CSA 22.2. NO 60950-1 and UL60950-1)
    • CB (IEC60950-1)
  • Electromagnetic Compatibility
    • CE Mark
    • FCC Class A
    • CISPR Class A
    • BSMI
  • Supported Transceivers and Cables
    • Please refer to the product datasheet
Download
Related Products
Talk to our experts today!
Edgecore Wi-Fi.
Choose the network that's right for you.